InoTec SCAMAX 2600 Service Manual page 61

The paper thickness selector can be set to values between 0 and 9. The common setting for 80 gsm
paper is '5'. To achieve this the entire adjustment area can be shifted in twelve steps via a parameter.
This is necessary to allow for unavoidable manufacturing tolerances.
The two guide plates in the area of the separation mechanism float the documents to the first pair of
rubber rollers. To ensure that even thin paper travels in the right direction the two guide plates, the top
and bottom one have seven finger-like extensions at their ends. These extensions prevent thin paper
wrapping itself around one of the rubber rollers.
Abstandseinstellung für S26/S40
®
SCAMAX Tech. Manual 06/2002 T-61
2600/4000