The reading of the CCD linear sensor and conversion into digital values described above takes place on
two channels. One channel each for odd and even pixels. With colour two channels are used for each
colour.
A shielded ribbon cable is connected to the CCD board (two for colour), which provides the connection to
the controller board and for colour also to the video interface.
Both mechanical and electronic adjustments are accomplished by using the service program.
3.1.1 Camera types
Two different types of CCD linear cameras are used for the SCAMAX
®
SCAMAX
2600:
®
SCAMAX
4000 :
CCD linear camera Type 3
®
SCAMAX
2600/4000
B&W CCD linear camera Type 0
B&W CCD linear camera Type 3
Colour CCD linear camera Type 2
CCD linear camera Type 0
Tech. Manual 06/2002
®
2600/4000 scanners.
CCD linear camera Type 2
T-17