Comm Setup - Samsung SCB-3000 User Manual

Operating Your Camera
Notes
• As the DIS function uses the digital zoom, the camera's resolution will decrease.
• DIS doesn't operate when background illumination is too low.
• DIS doesn't operate when object pattern is monotonic as like sky or white wall.
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the camera
through an external control device.
1) When the SPECIAL menu screen is displayed, press the Function Setup button so that
the arrow indicates 'COMM ADJ'.
2) Set up the mode using the Function Setup button.
1.CAM ID
2.BAUD RATE
3.UART MODE
4.RET PKT
5.DISP ID
6.PROTOCOL
7.RETURN
CAM ID : Determines the camera's identification number (between 0 and 255).
BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
UART MODE : You can select NONE, EVEN or ODD for the parity bits.
RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
DISP ID : Display camera title on top left corner of the screen.
PROTOCOL : Select the communication PROTOCOL.
(SAMSUNG-T, SAMSUNG-E , PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON
and PANASONIC)
RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.

COMM SETUP

9600
8-N-1
ENABLE
OFF
SAMSUNG-T
40
COLOR CCD CAMERA User Guide
1
S