Uart Mode; Using Coaxial Communications - Samsung SCB-3000 User Manual

* RS-485 Communication establishment initial value
• To control the camera by constructing an additional controller, use the SAMSUNG-T,
• Coaxial Communications System
• OSD Control method
r.
n
• Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
Item Camera ID
Initial value 1
Notes
SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON and PANASONIC protocol.

Using Coaxial Communications

CAMERA DVR
SET MENU/ENTER
UP UP KEY
DOWN DOWN KEY
LEFT LEFT KEY
RIGHT RIGHT KEY
BAUD RATE

UART MODE

9600 8-NONE-1
CONTROLLER
OSD KEY
JOYSTICK UP
JOYSTICK DOWN
JOYSTICK LEFT
JOYSTICK RIGHT
DVR
DVD
Distance
300m
450m
600m
19
COLOR CCD CAMERA User Guide
RET PKT
ENABLE
: BNC
•
• ---- : RS-485
Recommended Cable Specification
3C2V(RG-59/U)
5C2V(RG-6/U)
7C2V(RG-11/U)