Notes
• When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
• If you increase the SHARPNESS level too high, the picture may become distorted or noise
may appear.
CAM TITLE : If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Function Setup button so that the
arrow indicates 'CAM TITLE'.
2) Set it to 'ON' by using the Function Setup
button.
Press the Function Setup
3)
4) Use the Function Setup button to move to
a desired letter and select the letter by
pressing the Function Setup button.
Repeat this to enter multiple letters. You
can enter up to 15 letters.
5) Enter a title, move the cursor to 'POS' and press
the Function Setup button. The entered title
appears on the screen. Select the position to
display the title on the screen by using the
Function Setup button and press the Function
Setup button. When the position is determined,
select 'END' and press the Function Setup button
to return to the SPECIAL menu.
Notes
• When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even
if you enter one.
• and Numbers are available in this mode.
• If you move the cursor to CLR and press the Function Setup button, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
Function Setup button. Move the cursor over the letter to be edited, move the cursor to
the letter to be inserted and then press the Function Setup button.
CAMERA TITLE SETUP
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
.
button
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9
35
COLOR CCD CAMERA
User Guide
C L R P O S E N D
FRONT DOOR