Covers; Removing Jammed Media - Toshiba B-SP2D SERIES Owner's Manual

10. GENERAL MAINTENANCE

10.2 COVERS

1. Turn off the power, open the battery cover, and remove the battery pack.
2. The covers should be cleaned by wiping with a dry cloth or a cloth slightly
dampened with a mild detergent solution.
NOTE: Clean the printer cover with an electrostatic free cleaner for automated
office equipment.

10.3 REMOVING JAMMED MEDIA

1. Turn off the printer.
2. Open the media cover.
3. Remove the media roll from the printer.
4. Remove the jammed media. DO NOT USE any sharp implement or tool as
these could damage the printer.
5. Clean the print head and platen, then remove any further dust or foreign
substances.
Section 10.p65
10- 3
3
EO1-33052
10.2 COVERS
10/31/2005, 11:45 AM