LENCO LED-2217 Instruction Manual page 20

Press button to navigate to LNB section of the menu.
Select the LNB type and settings for your second LNB
and switch settings.
Press the blue Key to search the satellite channels.
A full description of the advanced Dish set up for
multiple satellites using DiSEqC switches and DiSEqC
positioner follows. This should only be attempted by
experience users.
The Dish set up main menu page displays the main inter-
face. The interface consists of Satellite List, Transponder
list and Dish/LNB parameter list
Satellite Edit
Press the Green button to enter the edit menu Edit pa-
rameters as described below
No. The current list number of the selected satellite Sat-
ellite name. Edited from the onscreen keyboard press
button to enter.
Satellite List
The Satellite list displays the satellite names.
In the input frame, use
characters.
Extend: Extended characters
Caps On: Change character case. Press OK button to
select.
Back: Delete letters, press OK to c
OK: Sure to set the naming of the satellite, and return to
Edit Menu
Cancel: Return directly back to edit menu.
and OK button to select
Input Frame (On-screen keyboard)
Longitude Direction: Added to determine the location of
the satellite. Use the arrow buttons to select West/
East.
Longitude Angle: Input Longitude. By moving the cursor
buttons to enter the satellite longitude.
Band: band selection. Press
Delete Satellite menu
Press the YELLOW button, the c
pear. Press OK to delete.
Add Satellite
Press the RED button to see the Add menu.
NO: This is the list placing number. This number cannot
be manually edited.
to select.
-
19