LENCO LED-2217 Instruction Manual page 18

Unlike QUICKSTART the satellite search will search the
whole satellite for channels and will not be instant.
Also the channels will appear in the order on the satellite
and not the pre-set order.
Auto search replaces any previous searched channels
with those of the new search. To add an extra satellite if
you have a suitable Dish/LNB/Switch you must use the
Dish Installation menu.
DTV Manual Tuning
You can manually tune DTV channels in the TV SETTINGS
menu. Press the Left/Right arrow buttons to select the
channel you wish to tune, then press OK button to scan
for the channel.
CADTV Manual Tuning
You can manually tune CADTV channels in the TV SET-
TINGS menu.
Frequency
Select Frequency using the
Symbol (ks/s)
Select the Symbol (ks/s) using the
QAM Type
Select the QAM Type using the
ATV Manual Tuning
You can manually tune ATV channels in the TV SETTINGS
menu.
Storage to
Press the buttons to change the numbered location
of the found channel.
System
Select the system using the
Current CH
Displays the current channel number, press the buttons
to choose the channel you wish to modify.
Search
Press the buttons to scan through the frequencies to
ew channels.
Fine tune
In case of bad reception, you can press the
mak stments to the tuning. After manual tun-
ing is complete, please press the RED button to save any
found channels.
buttons.
buttons.
buttons
buttons.
buttons to
17