Remote Management; Parental Control - TP-Link TL-WR847N User Manual

TL-WR841N/TL-WR841ND/TL-WR847N
After click the Add button, your PC's MAC Address will be placed in the list above.
Click the Save button to save your settings.

Note:
If your PC is blocked but you want to access the Router again, use a pin to press and hold the
Reset Button (hole) on the back panel for about 5 seconds to reset the Router's factory defaults
on the Router's Web-Based Utility.
4.9.4

Remote Management

Choose menu "Security → Remote Management", you can configure the Remote Management
function in the screen as shown in Figure 4-42. This feature allows you to manage your Router
from a remote location via the Internet.
Web Management Port - Web browser access normally uses the standard HTTP service

port 80. This Router's default remote management web port number is 80. For greater
security, you can change the remote management web port to a custom port by entering that
number in the box provided. Choose a number between 1 and 65534 but do not use the
number of any common service port.
Remote Management IP Address - This is the current address you will use when accessing

your Router from the Internet. This function is disabled when the IP address is set to the
default value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP address. If set to
255.255.255.255, then all the hosts can access the Router from internet.

Note:
1) To access the Router, you should type your Router's WAN IP address into your browser's
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port
number. For example, if your Router's WAN address is 202.96.12.8, and the port number
used is 8080, please enter
for the Router's password. After successfully entering the username and password, you will
be able to access the Router's web-based utility.
2) Be sure to change the Router's default password to a very secure password.

4.10 Parental Control

Choose menu "Parental Control", and you can configure the parental control in the screen as
shown in Figure 4-43. The Parental Control function can be used to control the internet activities of
the child, limit the child to access certain websites and restrict the time of surfing.
Figure 4-42 Remote Management
http://202.96.12.8:8080
- 51 -
300Mbps Wireless N Router User Guide
in your browser. Later, you may be asked