Dmz - TP-Link TL-WR847N User Manual

TL-WR841N/TL-WR841ND/TL-WR847N
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable All button to make all entries enabled.
Click the Disable All button to make all entries disabled.
Click the Delete All button to delete all entries.

Note:
1. When the trigger connection is released, the corresponding opening ports will be closed.
2. Each rule is allowed to be used only by one host on LAN synchronously. The trigger
connection of other hosts on LAN will be refused.
3. Incoming Ports cannot overlap each other.
4.8.3

DMZ

Choose menu "Forwarding → DMZ", you can view and configure DMZ host in the screen as
shown in Figure 4-36. The DMZ host feature allows one local host to be exposed to the Internet for
a special-purpose service such as Internet gaming or videoconferencing. DMZ host forwards all
the ports at the same time. Any PC whose port is being forwarded must have its DHCP client
function disabled and should have a new static IP Address assigned to it because its IP Address
may be changed when using the DHCP function.
To assign a computer or server to be a DMZ server:
1. Check the Enable radio button.
2. Enter the IP Address of a local host in the DMZ Host IP Address field.
Figure 4-35 Add or Modify a Port Triggering Entry
Figure 4-36 DMZ
300Mbps Wireless N Router User Guide
- 46 -