TP-Link TL-WR847N User Manual page 91

TL-WR841N/TL-WR841ND/TL-WR847N

Note:
Your opposite side should call your WAN IP, which is displayed on the "Status" page.
4) How to enable DMZ Host: Log in to the Router, click the "Forwarding" menu on the left of
your browser, and click "DMZ" submenu. On the "DMZ" page, click Enable radio button
and type your IP address into the "DMZ Host IP Address" field, using 192.168.0.198 as
an example, remember to click the Save button.
5) How to enable H323 ALG: Log in to the Router, click the "Security" menu on the left of
your browser, and click "Basic Security" submenu. On the "Basic Security" page, check
the Enable radio button next to H323 ALG. Remember to click the Save button.
300Mbps Wireless N Router User Guide
Figure A-6 DMZ
- 82 -