TP-Link TL-WR847N User Manual page 45

TL-WR841N/TL-WR841ND/TL-WR847N
 Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters.
 Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 WPA /WPA2 - Enterprise - It's based on Radius Server.
 Version - you can choose the version of the WPA security on the drop-down list. The
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
 Encryption - You can select either Automatic, or TKIP or AES.

Note:
If you check the WPA /WPA2 – Enterprise radio button and choose TKIP encryption, you
will find a notice in red as shown in Figure 4-20.
 Radius Server IP - Enter the IP address of the Radius server.
 Radius Port - Enter the port number of the Radius server.
 Radius Password - Enter the password for the Radius server.
 Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a
notice in red as show in Figure 4-21.
300Mbps Wireless N Router User Guide
Figure 4-19
Figure 4-20
Figure 4-21
- 36 -