Abus TVAC16000B User Manual page 28

Activating the circular buffer

Updating the system

Restoring factory settings / selecting the language and Hz
Here you can activate the circular buffer for the
recording.
If this function is deactivated, the monitor stops
the recording once the SD card is full.
Always use the latest system firmware.
can download the latest
website at www.abus.com
TVAC16000B). To download, please proceed
as follows:
1. Remove the SD card from your monitor
and insert it in a SD card reader which is
connected to your computer.
2. Unzip the folder. Save the files from the
folder to the SD card.
3. Remove the SD card again from the SD
card reader and put it back into the
monitor.
4. Go to System Settings, System Update,
press "Start" and the latest firmware will
be installed.
5. Press OK to install the latest firmware.
Cancel the procedure by pressing
"Delete".
Here you can select the language and the Hz
frequency.
When you change the language, the factory
settings are restored. When you confirm with
"OK", the system shuts down automatically.
Press "Delete" to cancel the procedure.
Once the system has shut down, restart by
pressing the power button.
You will then be prompted to calibrate the
screen. Follow the instructions.
26
English
You
version from our
(item number