Impex MARCY MWM 800 Owner's Manual page 16

STEP 5 (See Diagram 5 & Cable Loop Diagram)
A.) Attach the 137" Upper Cable (#52) to the open bracket on the front of the Upper
Frame (#6). Note: The Ball Stopper on the cable should be underneath the Frame.
B.) Attach a Pulley (#28) to the bracket and secure it with one 3/8" x 1 ¾" Allen Bolt
(#61), two 3/8" Washers (#77), and one 3/8" Aircraft Nut (#74).
C.) Draw the Cable to the open slot on the Vertical Beam (#4). Install a Pulley to the
opening. Align the holes and secure it with one 3/8" x 2 5/8" Allen Bolt (#60), two
½" Bushings (#71), two
D.) Draw the Cable over the Pulley then downward. Install a Pulley to the Flat Double
Floating Pulley Bracket (#23). Let the Bracket hanging for now. Draw the Cable
around the Pulley then upward to the open bracket on the rear of Upper Frame.
E.) Install another Pulley then pull the Cable downward to the Weight Holder (#8).
Connect the Cable to the Weight Holder with a Hook (#46).
F.) Slide two Handle Grips (#39) onto the Lat Bar (#18). Connect the Lat Bar to the
Upper Cable with two Hooks (#46) and one 12-linked Chain (#50).
3/8" Washers (#77), and one 3/8" Aircraft Nut (#74).
15