Impex MARCY MWM 1801 Owner's Manual page 24

STEP 13 (See Diagram 13)
A.) Insert one Foam Tube (#34) halfway through the hole on the Right Seat Support (#8). Insert
one Foam Tube (#34) halfway through the hole on the Leg Developer (#9). Push four Foam
Rolls (#38) onto the Tubes from both sides. Plug the Foam Roll End Caps (#74) into the ends.
B.) Attach the Lat Bar (#20) to the Chain (#51) using a C-clip (#63). Attach the Chain to the Upper
Cable (#26). See How To Use.
C.) Attach the AB Strap (#25) to the AB Cable (#30) using a C-clip.
D.) Attach the Arm Curl Handle (#32) to a Chain (#51) using a C-clip. Attach the Chain to the
Lower Cable (#27). Remove the Chain and Handle when using the Leg Developer.
23
DIAGRAM 13