Digisol DG-BR4000N User Manual page 109

Failure to access the Internet
4) Check whether your ADSL cable is connected to
the correct network interfaces.
5) Replace the network cable connected to the router
1) Check whether the status of indicators on the
ADSL modem and the wireless router is normal.
2) Check whether the WAN indicator is on. If the
WAN indicator is off, check whether the cable
connected to the WAN interface is loose.
3) When the WAN indicator is on but does not blink,
the router is connected to the Internet.
4) Reboot your PC.
5) Set the AP again.
6) Check whether the WAN indicator is on.
7) Check the encryption settings of the wireless
network.
8) Check whether the PC that connects to the router
can obtain the IP address through either the
wireless network or the cable network.
9) Check the LAN settings of your Internet options,
and do not use a proxy server for your LAN.
109
DG-BR4000N/E User Manual