Table of Contents
Advertisement
The speed at which the dome moves to a preset is set here. The default setting is 60% of
full speed.
4.9 Tours
Tours are sequences of up to 64 presets that the dome moves between automatically,
dwelling for a period at each. The tour is repeated until interrupted by:
•
Manual pan, tilt or zoom
•
Calling up a preset
•
An alarm
4.9.1.1
Edit Tour
4.9.1.1.1
Edit tour
Each position of the tour may be edited using this option. Any positions set to "No Preset"
will be ignored when the tour is running.
4.9.1.1.2
Add all preset to tour
Use this option to initialise a tour as follows:
•
Set
Fill the tour with presets. Presets that are not set will be ignored. As more
presets are programmed, they will automatically be included in the tour.
•
Clear
Clear the tour of all presets
•
Cancel Use LEFT to exit without changing the tour
4.9.1.1.3
Clear Tour
4.9.1.1.4
Title
If you want a title to be displayed when you select a tour, enter it here. Otherwise the default
T1, T2, T3 etc will be displayed.
4.9.1.1.5
Echedule
A different tour may run at different times of the day. Make sure restore mode is set to
restore to tour.
4.10
Privacy
Use this option to set up to 30 privacy zones
Step
Action
1
Select dome MENU from DVR/keyboard
2
Log in (using installer password)
3
Select PRIVACY
4
Move joystick or arrow keys up/down to select a different
MASK number, 1-30)
5
Move joystick/arrow key right
6
Move camera to required view
7
Select OK (Vi Keyboard) or 01+preset (Pelco Keyboard ),
or Preset, 10 ,1 (on DS2) or wait 5 seconds until a black
mask patch appears
8
Scroll to next MASK number (using arrow keys or joystick
UP/DOWN)
9
Move joystick or arrow key to the right
Videoswitch
CMOR Dome
Page 19
Vc607a.doc
Advertisement
Table of Contents
