CMOR Professional IR Dome User Manual Product ranges covered by this manual CMOR D4 Vi-AL1A Options Vi-PSU-1 Document Reference Date Firmware Vc607a.doc 14/12/2012 From Vc006-210 Videoswitch Telephone 01252-851510 Ocean House, Redfields Industrial Park 01252-851296 Redfields Lane, Church Crookham Email sales@videoswitch.co.uk Hants GU52 0RD www.videoswitch.co.uk...
Secure the bracket to the mounting plate using the 4 nuts supplied (C) • For safety reasons, at least one of the fixing screws must have washer fitted (D). • Position the umbilical cable (E) such that the connector (F) is above the dome support cradle (G) Videoswitch Page 1 Vc607a.doc...
Rotate the locking ring (C) counter-clockwise to lock the dome firmly in position. 1.1.4 Attaching the umbilical cable • Plug the waterproof connector on the umbilical cable into the top of the dome • Turn the locking ring (A) clockwise to secure the connector Videoswitch Page 2 Vc607a.doc...
Make sure the protective cup is in place on the pole. • Securely attach the mounting bracket using the screws provided. • Attach the dome and umbilical cable in the same was as described in previous paragraphs 1.1.3 and 1.1.4. • Slide down the protective cup. Videoswitch Page 3 Vc607a.doc...
Use this in conjunction with the Vi-B2 wall bracket to mount the dome on the corner of a building. 1.5 Vi-B6 Pole Adaptor Use this in conjunction with the Vi-B2 wall bracket to mount the dome onto a pole. Videoswitch Page 4 Vc607a.doc...
CMOR Dome 2 Installing Power Supply The CMOR dome runs from 24V DC. The Videoswitch Vi-PSU1 Power Supply must be used to power the CMOR dome. The Vi-PSU1 is housed in a weatherproof box that may be mounted externally or internally. Never apply 24AC to the standard DC dome.
RS485 (A) or (+) dome output RS485 (B) RS485 (B) or (-) dome output Spare Not connection RS485 ground *Note that the video connection(s) made be made either using the BNC connectors or the screw terminals, whichever is more convenient. Videoswitch Page 6 Vc607a.doc...
3.1 CMOR D4 Configuration 3.1.1 Auto-Protocol and Auto-Baud The CMOR D4 will automatically detect the protocol and the baud rate. There is no need to set anything, just start sending commands to the dome and it will detect the protocol and baud rate.
If you do need to turn the termination of a dome OFF, enter the dome Setup menu and turn the termination off. • If you are using a star expander (eg. Videoswitch Vi-E2) to drive multiple domes all domes should be have termination ON. This is the recommended method of connecting to multiple domes.
4.1.2 Moving cursor Once in the menu, the joystick may be used for LEFT, RIGHT, UP and DOWN control of the cursor. On a Videoswitch keyboard, the cursor keys can also be used. • move the cursor up, or change a value •...
Install date Clear settings Clear all presets Clear all tours Clear all privacy masks Clear configuration Clear everything Reboot Coax validate bytes Language Lamps Mode ON level OFF level hysteresis Auto lamp delay Lamp schedule Lamp Power Videoswitch Page 10 Vc607a.doc...
Page 15
Use pan limits Set right limit Set left limit Iris key usage Zoom Lock Presets Edit presets Preset 1 to 255 Set preset Auto-set presets Clear preset Title Preset dwell time Preset speed Default dwell Default speed Videoswitch Page 11 Vc607a.doc...
Once logged in, you remain logged in for 5 minutes from last use of the menu, even if you exit and re-enter the menu. If you want to log out more quickly to prevent unauthorised access, just enter an invalid password. Videoswitch Page 12 Vc607a.doc...
This ensures that maximum accuracy is maintained. The feature may be turned off if required. The dome may also perform a datum check if a misalignment is detected. The threshold determines how much mis-alignment must occur in order to trigger a datum check. Videoswitch Page 13 Vc607a.doc...
Increase it to eliminate interference or decrease it if the control is unreliable from a non- compliant controller. The normal setting is 4. 4.4.7 Language The language used in the menus may be set here. Currently English and French are supported. Videoswitch Page 14 Vc607a.doc...
Go LEFT to exit. 4.5.6 Lamp Power The power of the lamps may be set here. For maximum range set to 100%. For maximum life or if in confined area, reduce slightly. Videoswitch Page 15 Vc607a.doc...
There are two settings; Auto & Stored. The default setting for DAY is AUTO. 4.6.1.2.5 Zoom Limit The zoom limit can be adjusted from1 – 100% 4.6.1.2.6 Backlight compensation Backlight compensation can be turned ON or OFF Videoswitch Page 16 Vc607a.doc...
This setting determines how much the pan and tilt slows down as you zoom in and the setting is a matter of user preference. This slow down helps fine control of the dome position when zoomed in on a target. The default setting is 16. Videoswitch Page 17 Vc607a.doc...
UP/DOWN to select alphanumeric characters. Move joystick/arrow keys LEFT to save & exit menu. 4.8.1.5 Preset Dwell Time When a preset is used in a tour, this is the dwell time 4.8.1.6 Preset Speed Videoswitch Page 18 Vc607a.doc...
Select OK (Vi Keyboard) or 01+preset (Pelco Keyboard ), or Preset, 10 ,1 (on DS2) or wait 5 seconds until a black mask patch appears Scroll to next MASK number (using arrow keys or joystick UP/DOWN) Move joystick or arrow key to the right Videoswitch Page 19 Vc607a.doc...
If alarms still exist after all alarm presets have been visited for the New alarm dwell time, the presets of the still active alarms will now be toured using the cycle time (in seconds) specified in this option. Videoswitch Page 20 Vc607a.doc...
230mm x 140mm x 100mm (LxWxD), 1kg Dimensions/Weight (Boxed) 340mm x 225mm x 140mm (LxWxD), 1.3kg 5.2.4 Safety For safety reasons, the internal metal cover must not be removed. There are no user serviceable parts inside. Videoswitch Page 21 Vc607a.doc...
Electromagnetic Compatibility and 73/23/EEC Low Voltage directives, and with EN 60950:2000 safety standards. Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Videoswitch Page 22 Vc607a.doc...
Page 27
CMOR Dome Serial Number of dome Notes Notes Videoswitch Page 23 Vc607a.doc...
Page 28
CMOR Dome Videoswitch Page 24 Vc607a.doc...