Table of Contents
Advertisement
4.1.5 Exit Menu
Leave the menu by going LEFT out of all levels until you leave the menu. The menu will also
exit automatically if not used for 5 minutes.
All changes made will be saved when the menu is left. The message "Saved OK" will flash
up on the screen to confirm this
The menu structure is summarised below and the following section gives more details on
individual menu items. Note that the menu structure may differ slightly depending on the
version of firmware installed in the dome and on the camera(s0 that are installed in the
dome.
4.2 Menu Summary
Login
Display
Information screens
Date/Time
Title
Coordinate display
Show presets during tours
Startup screen timeout
Setup
Dome Address
RS485 Termination
Passwords
Datum checks
Install date
Clear settings
Coax validate bytes
Language
Lamps
Mode
ON level
OFF level hysteresis
Auto lamp delay
Lamp schedule
Lamp Power
Videoswitch
CMOR Dome
System
Status
Alarms
Camera
Coax
Enter date/time
Daylight saving
Display
Position on screen
Title
Display
Position on screen
Display
Coordinates position
Set address
Clear address
Installer password
Supervisor password
User password
Periodic datum check
Datum check time
Mis-alignment threshold
Clear all presets
Clear all tours
Clear all privacy masks
Clear configuration
Clear everything
Reboot
Page 10
Row
Column
Row
Column
Row
Column
Vc607a.doc
Advertisement
Table of Contents
