Fitting The Bracket Cover; Vi-B4 Pendant Bracket; Vi-B4 Swan-Neck Bracket - Videoswitch CMOR D4 User Manual

1.1.5 Fitting the bracket cover

•
Locate the two plastic sides of the cover on the metal support bracket
•
Fix together with the supplied screw using the supplied Allen key

1.2 Vi-B4 Pendant Bracket

The pendant bracket allows the dome to be mounted under a horizontal surface such as a
ceiling.
•
Secure the mounting end of the pendant bracket to the ceiling.
•
Make sure the protective cup is in place on the pole
•
Securely attach the mounting bracket using the screws provided.
•
Then attach the dome and umbilical cable in the same was as described in previous
paragraphs 1.1.3 and 1.1.4.
•
Slide down the protective cup.

1.3 Vi-B4 Swan-Neck Bracket

The swan-neck bracket allows the dome to be mounted above a horizontal surface such as
a roof, pillar top or other horizontal surface.
•
Secure the mounting end of the swan-neck bracket to the surface.
•
Make sure the protective cup is in place on the pole.
•
Securely attach the mounting bracket using the screws provided.
•
Attach the dome and umbilical cable in the same was as described in previous
paragraphs 1.1.3 and 1.1.4.
•
Slide down the protective cup.
Videoswitch
CMOR Dome
Page 3 Vc607a.doc