Context Camera; Invert Image; Keyboard; Restore Mode (Preset & Tours) - Videoswitch CMOR-D18? CMOR-D26 User Manual

5.5.1.5.1 Shutter Speed
The shutter speed may be slowed down to achieve greater light sensitivity. For night time
operation it may be useful to change this from its default AUTO setting. Longer time periods
will cause blurring of moving images however.
5.5.1.5.2 Exposure Compensation
5.5.1.5.3 Joystick Focus
There are two settings; Auto & Manual. The default setting for NIGHT is Manual.
5.5.1.5.4 Preset Focus Mode
There are two settings; Auto & Stored. The default setting for NIGHT is manual.
5.5.1.5.5 Zoom Limit
5.5.1.5.6 Backlight Compensation

5.5.2 Context Camera

5.5.2.1 Not available

5.5.3 Invert Image

This inverts the image. This option is used only if the dome is mounted upside down.

5.6 Keyboard

This sub menu selects options relating to manual control from the joystick keyboard.
5.6.1 Restore Mode (Preset & Tours)
Set this option if you want the dome to revert to a TOUR or PRESET 1 after a specified
period (in seconds) of inactivity.
If the restore mode is not required select OFF
5.6.2 Restore delay (Preset & Tours)
Select restore delay time in seconds. Select 180 seconds to OFF

5.6.3 Joystick/Speed Curve

This option determines the relationship between the joystick offset and the pan/tilt speed
and the setting is a matter of user preference. If linear, the relationship is proportional. If
quasi-linear or non-linear, the movement is slow to start with and increases rapidly as the
joystick is moved more. The default is quasi-linear.
Page 29