Camera Settings; Day Settings (Lamps Off); Shutter Speed; Exposure Compensation - Videoswitch CMOR D4 User Manual

4.6 Camera

4.6.1 Camera settings

4.6.1.1

Day Settings (Lamps OFF)

These settings apply when the IR lamps are not on.
4.6.1.1.1

Shutter Speed

The shutter speed may be slowed down to achieve greater light sensitivity. Normally this
should be set to AUTO.
4.6.1.1.2

Exposure Compensation

The brightness of the imagfe can be adjusted here
4.6.1.1.3

Joystick Focus Mode

There are two settings; Auto & Manual. The default setting for DAY is AUTO.
4.6.1.1.4

Preset Focus Mode

There are two settings; Auto & Stored. The default setting for DAY is AUTO.
4.6.1.1.5

Zoom Limit

The zoom limit can be adjusted from1 – 100%
4.6.1.1.6

Backlight compensation

Backlight compensation can be turned ON or OFF
4.6.1.1.7

Noise Reduction

4.6.1.1.8

Wide Dynamic Range

4.6.1.1.9

High Resolution Mode

4.6.1.1.10 Image Stabiliser

4.6.1.2

Night Settings (Lamps ON)

These settings apply when the IR lamps are on.
4.6.1.2.1 Shutter Speed
The shutter speed may be slowed down to achieve greater light sensitivity. Normally this
should be set to AUTO.
4.6.1.2.2 Exposure Compensation
The brightness of the imagfe can be adjusted here
4.6.1.2.3 Joystick Focus Mode
There are two settings; Auto & Manual. The default setting for DAY is AUTO.
4.6.1.2.4 Preset Focus Mode
There are two settings; Auto & Stored. The default setting for DAY is AUTO.
4.6.1.2.5 Zoom Limit
The zoom limit can be adjusted from1 – 100%
4.6.1.2.6 Backlight compensation
Backlight compensation can be turned ON or OFF
Videoswitch
CMOR Dome
Page 16 Vc607a.doc