S E T T I N G T H E A L A R M ( A R M I N G ) W H E N L E A V I N G
SYSTEM TROUBLE
SYS/TRBL
L O W B A T T E R Y
E02-00 SERVICE
SYS/TRBL
P R E S S R E S E T K E Y
C A N ' T A R M
SYS/TRBL
S Y S T E M
EXIT TIME 060
PLEASE LEAVE
NOW
CAN'T ARM SYSTEM
AREA X IN
TROUBLE
System Trouble
If you attempt to arm with a "SYSTEM TROUBLE" display alternating with an indicated trouble code (e.g.
"E02-00" (low battery); see SYSTEM TROUBLE ERROR CODES), a 3-second tone will sound at the
keypad. The window will display "PRESS RESET KEY, CAN'T ARM SYSTEM". If you cannot correct the
C
problem immediately, pressing
soon as possible.
Area Arming (Optional)
Some systems may be divided, or partitioned, into smaller independent subsystems, which are referred to
as Areas. In a system that has been partitioned into multiple areas, one or more area may be armed while
others remain disarmed.
Manager's Mode (Optional)
The Manager's Mode allows the user to arm/disarm other areas in a partitioned system. To arm/disarm a
different area:
1
Press the numerical key representing the other area number.
J
. The keypad will now provide status and control of that area.
G
2
Press
followed by
3
Enter your User Code followed by J to arm or disarm the area.
J
G
4
Press
followed by
to return to the home area.
Global Arming (Optional)
To arm all areas simultaneously, press
To disarm all areas simultaneously, press
•
The User Code must be valid in all area(s).
•
If any zone is not secured, the keypad will display "CAN'T ARM SYSTEM, AREA X IN TROUBLE",
where X indicates the number of the Area in trouble. All faulted zones in the respective area(s) must
be secured or bypassed. Note: If a system trouble is indicated, the system cannot be armed using
this method.
will enable you to arm in this condition. Be sure to call for service as
9, G
and enter your code followed by
0, G
and enter your code followed by
J
.
J
.
7