Gemini GEM-RP1CAe2 Operating Manual page 18

A C T I V A T E
D I A L E R T E S T
T O A R M I N 1 - 4 H R S
P R E S S 1 - 4
18
K E Y P A D F U N C T I O N S
Activate Telephone Test?
communicator test to the central station. A communication failure will be
Y / N
indicated at the keypad by a system trouble "E03-FAIL TO COMM" display.
Repeat the test to attempt to correct a communication failure, as any successful
communication will clear this display.
Delay Arming 1-4 hours. (Not for UL-listed systems.) Your system may be set to
/ N
arm automatically after a delay period of 1 to 4 hours.
To Delay Arm the system:
With the function "TO ARM IN 1-4 HRS" displayed in the window, e nter the desired
Delay Arming time in hours (
At the end of this 1 - 4 hour Delay Arming period, the siren will sound a 2-second
warning and the keypad will begin a 15-minute arming countdown with the sounder
pulsing. The sounder may be silenced at this time by pressing
back on with a steady warning tone 1 minute prior to arming, at which time the
building must be exited.
The same steps can be used to delay a scheduled Auto Arming, if your system has
been programmed as such.
(Telephone Test programmed?
), followed by
1,2,3 ,or 4
q q
Sends a
YES NO).
J
.
C , but it will turn