Gemini GEM-RP1CAe2 Operating Manual page 30

Exit/Entry Delays:
Separate
delays that let you exit and
enter your premises without
setting off an alarm when the
system is armed.
INTERIOR Button:
Bypasses
Interior Zones on arming (see
Zones - Interior Zones).
Instant Protection:
without entry delay using the
F button while remaining
on the premises.
Keypad:
Puts control-panel
functions at your fingertips. It
can be mounted anywhere in
your premises.
Manager's Mode:
In a partitioned
s y s t e m , a l o w - s e c u r i t y
operating mode that allows
arming by area.
Panic Buttons:
Blue buttons on
the keypad ( G and
or ). If enabled,
8 9
30
G L O S S A R Y
pressing
G
7 , 8
the central station of a fire,
auxiliary, or police emergency.
Partitioned System:
that has been subdivided into
two or more (up to eight)
Arming
independent
(areas).
Pre-Alarm Warning:
sounder alert of an impending
a l a r m . T h i s
programmable by zone for the
same duration
programmed for Abort Delay
(see Abort Delay).
Report:
A transmission to a
central station notifying of a
change in the status of the
system (alarm, trouble, low
7 ,
battery, etc.).
RF Low Battery:
tems only) Weak transmitter
together with battery.
F Check In:
or 9 will alert
only) Periodic test report from
transmitter (if a report is not
r e c e i v e d
supervisory-failure
A system
trouble will result).
Ringback:
verifying the central-station's
subsystems
receipt of a closing report.
Service Code:
A keypad
for temporary use.
Sounder -
o p t i o n i s
at each keypad to alert that (a)
entry delay has started; (b) an
as that
attempt was made to arm with
a zone in trouble; (c) a Day-
Zone condition exists (see
Zones: Day Zone); (d) 10
seconds exit time remaining;
(e) invalid code entered; or (f)
central station acknowledged
arming (see Ringback).
(Wireless sys-
(Wireless systems
o n t i m e , a
system
A beep after arming
A code intended
A local warning device