Station Protect; Sys On By Id, Start By Id; Owner Id Change - Yanmar 4JH45 Operation Manual

ENGINE OPERATION
Vessel Control System (VC10) has the
following functions, which can be set in the
Utility screen of MAIN MENU in the Digital
Display. For more details, refer to the
Vessel Control System Installation Manual.

Station Protect

It is a function to prevent the operation
from the other stations while steering.
• Select "YES" to enable "Station protect".
The display and control head of that
station can no longer be operated.
• Select "NO" or turn off the system power
to disable "Station protect".

Sys on by ID, Start by ID

It is a function to check ID for the purpose
of anti-theft.
• If you select "YES" in "Sys on by ID", it is
necessary to enter the Owner ID on the
display when turning on the system
power. If you select "YES" in "Start by
ID", it is necessary to enter the owner ID
on the display at engine start.
• The initial ID is "00000" and it can be
changed with the below "Owner ID
change" function.
• Even when the system power is turned
off, the selected "Sys on by ID" and
"Start by ID" cannot be disabled and it is
required to enter the Owner ID at each
time.
• After entering the ID and verification, if
you don't operate for 10 seconds, the
entry becomes invalid and it is required
to enter the Owner ID again.
62

Owner ID Change

The ID used in "Sys on by ID" and "Start by
ID" can be set and changed as follows.
• If you select "Owner ID change", the ID
verification screen is displayed and you
are asked to enter the current ID
(Default: "00000").
• If you enter the wrong ID 5 times, the ID
is locked and you are no longer able to
make an input. The lock can be released
by turning off the system power.
• ID can be changed to any 5 digit number
from 00000 to 99999.
• Select the number from 0 to 9 with the 
 buttons. The fixed number is displayed
by an asterisk when you press the 
button and the next digit is highlighted.
• Press the [ENTER] button after
highlighting it with the  button when all
5 digits are entered and the new ID
becomes valid.
Figure 9
Figure 12
Figure 10
Owner ID change
Input new Owner ID made
of five digits to replace
current Owner ID
Figure 13
JH Series Operation Manual
3
039895-00X00
3
039896-00E00