Maintenance; Spare Parts - Yardworks YW1000DW Instruction Manual

In ordinary conditions, the pump does not require any maintenance.
Make sure the pump is disconnected from electric power supply before performing maintenance procedures.
Cleaning the Pump Housing
Use a moist cloth to wipe down the pump housing (2). Allow to dry thoroughly before storing in a dry location that is
protected from bad weather conditions.
Cleaning the Suction Base
Gently hose down with low pressured water. Allow to dry thoroughly before storing.
Power Cable
For all submersible pumps, a H07RN-F cable is required to be fitted. Contact Yardworks customer service for
suitable replacement cable.
Limited spare parts are available subject to availability. Please contact your local Bunnings Special Orders Desk to
order the required spare parts.
Most common spare parts listed below
Spare Part
O-Ring (2 pack)
L-shaped Connector
Universal Adaptor

MAINTENANCE

SPARE PARTS

Part No.
SPYW1000DW-38
SPYW1000DW-39
SPYW1000DW-40
14