Syn248 SB35020/SB35025 Deskset User's Guide
Registering an Optional Cordless Headset (SB35025 Only)
You can register one AT&T DECT Cordless headset to a SB35025 Deskset. When a
Deskset has a cordless accessory, the Deskset and headset are all part of the same
extension, and only one device can be used at a time.
The headset must be in the charger, fully charged and deregistered from any
other device before registration can proceed. Remove and replace the cordless
headset before you press
To register a cordless headset:
1. Press
The Cordless Headset menu appears.
2. Remove and replace the cordless headset from its charging base.
3. Press
for the headset.
4. When registration is complete, Headset is registered appears.
5. Press
Deskset Settings
Register
(MENU), then 2, and then 6.
. Registration in Progress... appears while the Deskset searches
Register
(CANCEL). The User Settings menu appears.
While registration is in progress, registration can be terminated by pressing
(CANCEL) on the Deskset.
If the cordless headset is registered to another Deskset, it must be
deregistered first. See
"Deregistering a Cordless Headset" on page
86
Back to Contents
on the Deskset.
87.