illy X7 Metodo Iperespresso Instruction Manual page 21

PROBLEM
The water tank leaks after
it has been filled
After having pressed the steam button,
the machine does not light up the
steam icon situated on the circular
crown which shows the preparation
phase, but the coffee icon flashes
Coffee drips from capsule before
extraction starts
SOLUTION
- Empty the water tank, press the transparent rubber washer
of the connection valve inside the tank firmly into place
- The machine needs to cool down after a prolonged delivery of steam;
wait a few minutes and the machine will begin working again
- Some dripping during the first few seconds of extraction is normal
A
B
D
E
C G
EN
IF PROBLEM
PERSISTS
Contact
Assistance
47