Electrolux EVE916BA User Manual page 12

12
USING THE OVEN
Cooking with the timer
Your oven is equipped with a programmable controller that
can be used to turn the oven on and off automatically. The
'cook time' controls are used to automatically turn the oven
off after a set amount of time. The 'Delay End' controls are
used to set the time of day that you want the cooking cycle
to finish at.
Setting the cook time
1. Select the desired oven function and
cooking temperature.
2. Touch the cook time
(or hold), until the desired cook time has been set.
3. Press 'OK' or after 8 seconds from the last time
adjustment the oven will start cooking and the 'cook
time' display will countdown to zero.
4. The oven will turn off and beep when the 'cook time'
display reaches zero.
ImpOrTAnT!
• W hen you use the 'cook time' function, the 'Finishes
at' display activates and tells you what time of day the
oven will turn off (based on the set cook time).
• D uring cooking, you can adjust the cook time with the
Cook time or
• W hen the cook time has elapsed, an audible signal
will sound for 10 seconds, the oven will switch off and
COOKING FINISHED will be displayed.
• T o stop the audible signal, press any of the symbols on
the control panel.
• I f you wish to cook a bit longer, press the 'cook time'
symbol for each additional minute you require.
The oven automatically reverts to the function and
temperature previously programmed. This feature is
available for 5 minutes after cooking has finished. After
that, the oven automatically switches off.
symbol as often as necessary
symbols.
Setting the delay end time
The delay end function can be used to switch the oven on
and off at a specific time during the day.
1. Check the clock displays the correct time of day.
2. Select the desired oven function and
cooking temperature.
3. Set the required cook time.
4. Press the "delay end" symbol
5. Touch 'OK' or after 8 seconds from the last time
adjustment the SET icon will light and your oven is now
programmed. The oven will start its cooking cycle to
finish at the set "end time"
6. When the oven has finished cooking, cook time can
be extended or the beeper turned off just as in 'cook
time' mode.
7. Touch the 'delay end'
time forward.
8. Touch 'OK' or after 8 seconds from the last time
adjustment the SET icon will light and the oven is
now programmed.
The oven will commence its cooking cycle to finish at the
set 'end time'.
ImpOrTAnT!
• 3 0 seconds after a cooking function has started, it is
no longer possible to delay the start time.
• I n order to delay a cooking function that has already
started, the oven needs to be switched off then
switched on again and re-programmed.
• E ven though the heating element turns off, the oven
will still retain substantial heat. This will continue to
cook food until it is removed or the oven cools down.
If you do not plan on being present when the oven
turns off, you should take this extra heating time
into account.
to move the end time.
symbol to move the end