Getting System Information; Checking System Power - Raymarine 45STV User Manual

3.5 Getting system information

You can use the ACU to display system product serial numbers and
software versions.
The procedure for doing this is described as part of the maintenance
procedures.
System operation & setup

3.6 Checking system power

1. Carry out the Enter setup mode procedure to display the SET
SAT PAIR? screen.
2. Press the NEXT soft key seven times to display the VIEW
POWER? screen. The following information is displayed:
The following information is displayed sequentially:
• ACU POWER
• ANT POWER (antenna power)
• IRD power.
3. To leave the power display, press the EXIT soft key.
The SETUP MODE? entry screen is then displayed.
4. Press either:
• YES if you want to use another setup function, or
• NO to re-initialize the system.
37