Setup Using The Acu - Raymarine 45STV User Manual

Monitoring antenna operation
With the system switched on and running, the ACU display shows
the current status of the antenna. This can be either:
• TRACKING - the antenna is tracking the satellite
• SEARCH - the antenna is looking for the satellite
• UNWRAPPING - the antenna is unwrapping cable
You can check the details of the satellite position by pressing the
center soft key:
• Once to see the elevation
• Twice to see latitude, longitude and signal strength
• Three times to return to the normal operating display
28

3.3 Setup using the ACU

Setup principles
Using the ACU
The ACU setup mode gives access to a series of setup pages, to
enable you to adjust the system parameters.
When setting up the system from the ACU, three context-dependent
soft keys below the display are used to select and adjust the
required parameters.
SET SAT PAIR?
NEXT
PREV YES
Single function soft keys are used only during setup routines:
• The BACK soft key enables you go to the previous screen.
• The ENTER soft key is used to confirm settings.
You can:
• Define a pair or trio of satellites you want to use.
• Set the system to work with GPS.
• Edit a range of satellite information.
• Set various antenna parameters.
• Set the LNB local frequency.
• Set the DiSEqC method.
• Reset the system to factory default values.
You can also use setup mode to manually control the direction that
the antenna points
BACK
ENTER
Raymarine Satellite TV Systems User's Guide