Raymarine 45STV User Manual page 34

• The NO soft key to discard any changes.
The SETUP MODE? entry screen is then displayed.
10. Press either:
• the YES soft key, if you want to use another setup function, or
• the NO soft key, to re-initialize the system using the new
settings.
Setting LNB local frequency
We recommend that you do NOT attempt to change the LNB local
frequency.
However, if you have to do so, contact the Raymarine Customer
Support Department for advice before making any changes.
1. Carry out the Enter setup mode procedure to display the SET
SAT PAIR? screen.
2. Press the NEXT soft key four times to display the SET LOCAL
FREQ? screen.
3. Press YES to display the LNB TYPE: screen.
4. Carry out the setting up procedure for single band or universal
band, as necessary.
• Single band frequencies are:
– Asia, 11300 Mhz.
– Japan, 10678 MHz
– Korea, 10750 MHz
– America. 11250 MHz
• Universal frequencies are:
– Low band, 9750 MHz
– High band, 10600 MHz
34
Setting single band LNB frequency
With the LNB TYPE: screen displayed:
1. Use the PREV or NEXT soft key to scroll to SINGLE
2. Press SELECT to display the LOCAL FREQ edit screen
3. Set the required frequency as follows:
i. Use the + and - soft keys to change the value of the character
above the cursor (underscore), as necessary.
ii. Press the INPUT soft key to accept each correct character
and move the cursor to the next character.
iii. Repeat sub-steps a, b and c until the correct frequency has
been entered.
4. Press the ENTER button to accept the frequency value and
display the SAVE? screen.
5. Press, either:
• The YES soft key to save the changes you have made, or
• The NO soft key to discard any changes.
The SETUP MODE? entry screen is then displayed.
6. Press either:
• YES if you want to use another setup function, or
• NO to re-initialize the system using the new settings.
Setting universal LNB frequency
With the LNB TYPE: screen displayed:
1. Use the PREV or NEXT soft key to scroll to UNIVERSAL
2. Press, either:
• The YES soft key to save the changes you have made, or
• The NO soft key to discard any changes.
The SETUP MODE? entry screen is then displayed.
3. Press either:
Raymarine Satellite TV Systems User's Guide