Power Requirements - Raymarine 45STV User Manual

ACU dimensions
185 mm (7.3 in)
217 mm (8.5 in)
Routing cables
Cables must be routed correctly, to maximize performance and
prolong cable life.
• Do NOT bend cables excessively. Wherever possible, ensure a
minimum bend radius of 100 mm.
16
Minimum bend
200 mm (8 in)
diameter
• Protect all cables from physical damage and exposure to heat.
Use trunking or conduit where possible. Do NOT run cables
through bilges or doorways, or close to moving or hot objects.
• Secure cables in place using tie-wraps or lacing twine. Coil any
extra cable and tie it out of the way.
• Where a cable passes through an exposed bulkhead or deckhead,
use a suitable watertight feed-through.
• Do NOT run cables near to engines or fluorescent lights.
Always route data cables as far away as possible from:
• other equipment and cables,
• high current carrying ac and dc power lines,
• antennae.

Power Requirements

D11550-1
A Raymarine 45 STV system needs either a 12 V dc or 24 V dc
power supply.
If the IRD(s) and television(s) require a 220/240 V ac power supply,
a suitable dc-to-ac to converter must be fitted, to provide the
necessary power from the boat's dc power supply.
Grounding
These requirements apply when grounding Raymarine equipment.
Minimum bend of cable
100 mm (4 in) radius
Raymarine Satellite TV Systems User's Guide