Table of Contents
Advertisement
ENGLISH
Problem
The dishes are
No rinse aid has been used.
wet and dull
The rinse aid dispenser is empty.
There are
Wrong dosage of rinse aid.
streaks, milky
spots or a blu-
ish coating on
glasses and
dishes
Dry water
Wrong dosage of rinse aid.
drop signs on
The detergent can be the cause.
glasses and
dishes
Technical data
Dimensions
Water supply pressure
Capacity (place settings)
Energy class
Washing class
Drying class
Noise (dB(A))
Average annual energy con-
2)
sumption (kWh)
Average annual water con-
2)
sumption (litres)
1) If the pressure in your area is lower or higher, please contact your After Sales Service.
2) The data is based on the washing programme for test institutes assuming 220 cycles per a year.
Information on the electrical connection, voltage and overall power is given on the rat-
ing plate on the inner edge of the dishwasher door.
Installation
Caution! Refer to the assembly
instructions, in order to proceed with the
installation.
Possible cause
Width (cm)
Height (cm)
Depth (cm)
1)
Minimum
Maximum
9
A
A
A
50
176
2860
Set the rinse aid dosage.
Fill the rinse aid dispenser.
Decrease the rinse aid dosage.
Increase rinse aid dosage.
Use different type of detergent.
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Warning! Make sure that mains plug is
disconnected from the mains socket
during installation.
Solution
44,6
81,8-89,8
55,0
18
Hide quick links:
Advertisement
Table of Contents
