What To Do If - IKEA RENLIG DW45 Owner's Manual

ENGLISH
Frost precautions
Caution! Do not install the appliance
where the temperature is below 0 °C.
The manufacturer is not responsible for
damage because of frost.

What to do if...

The appliance does not start or stops during operation.
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solu-
tion to the problem yourself, contact your dealer or the After Sales Service.
Problem
• Continuous flash
of the light of the
running pro-
gramme.
• Intermittent audi-
ble signal.
• 1 flash of the end
indicator light.
Malfunction:
The dishwasher
does not fill with wa-
ter.
• Continuous flash
of the light of the
running pro-
gramme.
• Intermittent audi-
ble signal.
• 2 flashes of the
end indicator
light.
Malfunction:
The dishwasher will
not drain.
Possible cause
The water tap is blocked or furred
with limescale.
The water tap is closed.
The filter in the water inlet hose is
blocked.
The connection of the water inlet
hose is not correct. The hose can
be kinked or squashed.
There is a blockage in the sink spi-
got.
The connection of the water drain
hose is not correct. The hose can
be kinked or squashed.
If not possible, empty the appliance and
close the door. Disconnect the water inlet
hose and remove water from the water inlet
hose.
Clean the water tap.
Open the water tap.
Clean the filter.
Make sure that the connection is
correct.
Clean the sink spigot.
Make sure that the connection is
correct.
Solution
16