Standby Mode Notice - Panasonic PT-EX600U Service Manual

Standby Mode Notice

This projector provides 3 types of standby mode, Normal standby mode, Eco standby mode and Network standby
mode. According to the standby mode "Normal", "Eco" or "Network", several functions are restricted as shown in the
table below. To change the standby mode, use the projector's menu "Setting".
Normal ............ Normal standby mode.
Network .......... Supply the power to the network function even after turning off the projector. You can turn on /off
the projector via network, modify network environment, and receive an e-mail about projector status
while the projector is powered off.
Eco ................. Select "Eco" when you do not use the projector via network. The projector's network function will
stop when turning off the projector.
When "Eco" is selected, several functions will be restricted.
Restricted function in the standby mode
Function
Network
Serial command control
Monitor out
Audio out
RC sensor setting
*1 When "Eco" is selected, all of the infrared remote receivers, top, front or rear are activated in the eco
standby mode regardless of the RC sensor setting.
Normal
✔
✔
✔
✔
✔
-22-
Eco Network
--
--
--
--
✔ *1
✔
✔
--
--
✔