Panasonic PT-EX600U Service Manual page 34

Optical Parts Disassembly
2. Polarized glass-in removal
1. Remove 2 screws-E (M2.5x6) each on the polar-
ized glass assy and remove the stoppers, and pull
the polarized glass assy upward (Fig.1).
Polarized glass assy
Point marker
Polarized glass-in (B) *
* Note on handling the polarized glasses
Polarized glass-in (B) and (G) are very sensitive parts.
Never touch or wipe the both surfaces. Grab the edge
of the glass by new gloves when handling the polarized
glass. When removing the dust on the surface, use a
commercial (inert gas) air spray to remove them. Never
use organic solvents.
E
E
D
E
Point marker
-34-
D
E
E
D
E
Fig. 1
Polarized glass-in (R)
Film attached side
comes to this side
Point marker
Polarized glass-in (G) *