Using The Lens Antitheft Screw - Panasonic PT-EX600U Service Manual

Maintenance

Using the lens antitheft screw

This projector provides a lens antitheft screw to protect the projection lens stolen from a suspicious person. Mount
the lens antitheft screw by following the instructions below.
Mounting the lens antitheft screw
1
Loosen a screw-A on the lamp cover and slide it to
open (Fig. 1).
Loosen a screw-B on the prism cover and slide it in
2
the arrow direction (Fig. 2).
3 Insert the lens antitheft screw onto the screw hole
on the cabinet top and turn it until the lens release
button is locked (Fig. 3).
4
Close the prism cover and tighten the screw-B, and
close the lamp cover and tighten the screw-A.
Check that the lens release button is locked to pro-
tect the projection lens removing.
Note: Be careful not to drop the lens antitheft screw into
the opening of the projector when mounting the
screw.
Lens release button
Lamp cover
A
Prism cover
-19-
Fig. 1
B
Fig. 2
Lens antitheft screw
Fig. 3