Key To Symbols; Symbols - Jonsered Frontrider FR2315 MA Operator's Manual

Symbols

These symbols are on the machine and in the instructions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Fast
Slow
Stop the engine.
Choke.
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
Warning: rotating parts. Keep hands and feet
clear.
Clutch in

KEY TO SYMBOLS

Clutch out
Parking brake
Brake
Clutch
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter and
on the label.
Rotary blades.
Do not insert your hands or feet under
the cutting deck when the engine is
running.
Do not use the Rider on ground that slopes
more than 10°.
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine or
equipment
Drive very slowly if no cutting unit is fitted
Before and during reversing procedures,
look behind you.
Watch your hands and other body parts
so they do not get caught and crushed
between the belt and belt pulley.
Switch off the engine and take off the ignition
cable before repairs or maintenance
>10
– 5
English