Show Sensitivity; Show Mode Info; Display Timeout; Master Reset - Minelab E-Trac Instruction Manual

Preferences Menu
78

Show Sensitivity

Range: On or Off
Factory Preset: On
You can select whether the Sensitivity Gauge
(pp. 54–6) appears on the Detection Screens
or not. If the Sensitivity Gauge is On, you will
be able to adjust the Sensitivity using the
Navigation Buttons. If the Sensitivity Gauge is
Off, you need to enter the Sensitivity Menu to
adjust the Sensitivity settings.
To show or hide the Sensitivity Gauge:
1 Press the Menu button
2 Scroll across to Preferences (using the Right
or Left Navigation button)
3 Scroll down to Show Sensitivity (using the
Down Navigation button)
4 Press either the Left or Right Navigation
button to change between On or Off
5 Press the Detect button to exit the Menu
and resume detecting

Show Mode Info

Range: On or Off
Factory Preset: Off
Show Mode Info allows you to turn the Mode
Information Icons (p. 38) On or Off. Selecting
On displays the Mode Information Icons in
the Detection Screens. Off hides the Mode
Information Icons.
Mode Information Icons
To show or hide the Mode Information
icons:
1 Press the Menu button
2 Scroll across to Preferences (using the Right
or Left Navigation button)
3 Scroll down to Show Mode Info (using the
Down Navigation button)
4 Press either the Left or Right Navigation
button to change the between On or Off
5 Press the Detect button to exit the Menu
and resume detecting

Display Timeout

Range: On or Off
Factory Preset: Off
Display Timeout can be turned On or Off.
When the Display Timeout is On, the last
detection result will be cleared from the
screen after 5 seconds. The detection results
are FE-CO numbers, Target Crosshair and
Depth Gauge.
When the Display Timeout is Off, the last
detection result will remain until a new
detection is made, or the Detection Screen is
changed.
Detection Results
To turn Display Timeout On or Off:
1 Press the Menu button
2 Scroll across to Preferences (using the Right
or Left Navigation button)
3 Scroll down to Display Timeout (using the
Down Navigation button)
4 Press either the Left or Right Navigation
button to change the between On or Off
5 Press the Detect button to exit the Menu
and resume detecting

Master Reset

Master Reset will restore all settings to the
Factory Presets and erase all of your User
Modes and Discrimination Patterns.
If you only require a Reset, see p. 19 for more
information.
Note: If you enter the 'Master Reset' dialogue
box by mistake, scroll down to Cancel to return
to the Preferences Menu.
To Master Reset the detector:
1 Press the Menu button
2 Scroll across to Preferences (using the Right
or Left Navigation button)
3 Scroll down to Master Reset (using the
Down Navigation button)
4 Press either the Left or Right Navigation
Button to enter Master Reset
5 Scroll up to Yes and press either the Left
or Right Navigation button to initiate the
Master Reset.
A 'Reset' message will appear on the screen
and a tune will sound. Once the message
disappears and the Pattern Screen appears
on the LCD the detector has been reset
and E-Trac is ready to detect again.
79