Minelab E-Trac Instruction Manual page 26

Discrimination Menu
46
Manual Mode
Manual Mode allows you to manually move
the Edit Frame around the Discrimination
Pattern. By using the Accept/Reject button
you can edit areas of the Discrimination
Pattern to either accept (white areas) or reject
(black areas) certain targets.
To change the size of the Edit Frame:
Press the Left Shift button to switch between
the four Edit Frame sizes.
To move the Edit Frame:
Press, or press and hold, the Navigation
buttons (Up, Down, Left and Right) to move
the Edit Frame around the Disc. Pattern.
If you are moving the Edit Frame across
the Smartfind Window, either horizontally
or vertically, and you reach the edge of the
Smartfind Window the Edit Frame will loop
back to the opposite side. This feature is
designed to allow you to quickly move
from one edge of the Smartfind Window
to the other.
To reject the framed area:
Press the Accept/Reject button. A cross will
appear above the Smartfind Window and the
area of screen within the Edit Frame will turn
black. You can now move the Edit Frame to
another part of the Discrimination Pattern
and continue Editing.
CAUTION: Pressing the Menu button
while in Edit will take you back to the
Discrimination Menu and all changes
made in Edit will be lost.
To accept the framed area:
Press the Accept/Reject button. A tick will
appear above the Smartfind Window and the
area of screen within the Edit Frame will turn
white. You can now move the Edit Frame to
another part of the Discrimination Pattern
and continue Editing.
Tip: Holding down the Accept/Reject button
while moving the Edit Frame around the
Smartfind Window continually edits the pattern.
47