Instructions; Warnings - Graco 700 Instructions Manual

Warning Symbol
WARNING
his symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

INSTRUCTIONS

This equipment is for professional use only.
Read all instruction manuals, tags, and labels before operating the equipment.
Use the equipment only for its intended purpose. If you are not sure, call Graco Technical Assis-
tance at 1–800–543–0339.
Do not alter or modify this equipment.
Check equipment daily. Repair or replace worn or damaged parts immediately.
Do not exceed the maximum working pressure of the lowest rated component in your system.
This equipment has a 100 psi (7 bar) maximum working fluid pressure and a 100 psi (7 bar)
maximum working air pressure.
Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech-
nical Data section of all equipment manuals. Read the fluid and solvent manufacturer's warn-
ings.
Methylene Chloride with formic or propionic acid is not recommended as a flushing or cleaning
solvent with this gun or any other device with nylon or aluminum components as it can damage
these parts.
Wear hearing protection when operating this equipment.
Read and follow the fluid and solvent manufacturer's literature regarding the use of protective
eyewear, gloves, clothing, respirator and other equipment.
Handle hoses carefully. Do not pull on hoses to move equipment.
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not ex-
pose Graco hoses to temperatures above 82 C (180 F) or below –40 C (–40 F).
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
Symbols
Caution Symbol
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING WARNING
CAUTION