Graco 700 Instructions Manual page 5

Chart 2: Fluid Nozzle/Needle Combinations*
Type Type
Nozzle/ Orifice
Needle Size
0/0 0.047"
(1.2 mm)
03/0 0.055"
(1.4 mm)
11/1 0.055"
(1.4 mm)
21/2 0.070"
(1.8 mm)
3/3 0.098"
(2.5 mm)
* Needles and fluid nozzles are manufactured in matched, lapped sets and should be ordered as a kit to ensure
perfect seating of the needle in the fluid nozzle.
Chart 3: Air Caps Available
Pattern Length Pattern Length
at 10 in.
Type (254 mm)
0 13–16"
(330–400 mm)
11 8–10"
(200–250 mm)
2 9–11"
(230–280 mm)
21 10–12"
(250–300 mm)
3 11–13"
(280–330 mm)
NOTE: See page 18 for Air Flow Charts.
Ordering Charts
Flow Rate Flow Rate
fl oz/min Recommended Usage
(liters/min) (see TERMS above)
8–18 Light fluid
(0.24–0.54) Pressure feed
16–30 Medium fluid
(0.48–0.90) Pressure feed
4–10 Light fluid
(0.12–0.30) Siphon feed
8–12 Medium fluid
(0.24–0.36) Siphon feed
12–18 Heavy fluid
(0.36–0.54) Siphon feed
Pattern Shape
Recommended Usage
Long taper. Medium to high pro-
duction. Lacquers, acrylics,
epoxies.
Blunt end. Low to medium pro-
duction. Lacquers, enamels.
Blunt end. Medium production.
Lacquers, enamels.
Blunt end. Medium production.
Fine finish, metallics.
Tapered. Medium to high produc-
tion. Heavy fluids.
Order Part Number
Kit Nozzle Only
106–734 106–710
106–735 106–714
106–736 106–711
106–737 106–712
106–738 106–713
Recommended
Consumption Nozzle
cfm at psi cfm at psi
(m /min
0 03
at bar)
15 at 50 X X
(0.42 at 3.5)
12 at 50
(0.34 at 3.5)
11 at 50
(0.31 at 3.5)
15 at 50
(0.42 at 3.5)
12 at 50
(0.34 at 3.5)
Needle Only
106–721
106–721
106–722
106–723
106–724
Order Order
Part
11 21 3
Number
106–700
X 106–702
X 106–703
X 106–704
X 106–705