Switch - BYD e6A Owner's Manual

Front headlight
The switch is used to adjust the up/down
beam angle of the front headlights. After the
low beam lights are turned on, the switch can
start to work.
6 gears are provided for the switch. When the
switch is turned upward, the front headlight
beam angle will move upward; when the
switch is turned downward, the angle will
move downward.
Recommended
vehicle load conditions
One person in the driver
seat, and one each in the
driver seat and the front
passenger seat
fully seated

1-60 Switch

BYD e6A AUTO Owner's Manual
fully seated and cargo
loaded
driver plus trunk loaded
with the maximum load for
the rear axle
Emergency warning light switch
Mileage
Backlight
changeover
brightness
switch
adjustment switch
1. Mileage change over/reset (ODO/
TRIP) switch
In the ACC gear, every time the switch of
gear
"ODO/TRIP" is pressed, the mileage display
mode in the combination instrument will be
Gear 0
changed once in the following order:
odometer-TRIP A-TRIP B-odometer.
Gear 0.5
gear 0.5 or
gear 1
gear 2
Clock adjustment switch
Mode
H hour
changeover reversing radar
M minute
switch power switch
R reset
2. Backlight brightness adjustment
switch
In the gear ON, the brightness of the vehicle
backlight can be adjusted by pressing the
button.
a) Daylight mode: before the combination
switch is turned to the position
press down the backlight adjustment
button to adjust the backlight brightness of
the combination instrument. Five levels of
brightness (1-5) are provided. Brightness
can be adjusted from level 1 to level 5 in a
circulating way.
,