BYD e6A Owner's Manual page 124

NOTICE
To avoid being stranded due to insufficient
power and also for the sake of battery
service life, it is recommended that the
vehicle is charged when the handle is
pointed to the red warning area. Do not
charge when the battery is depleted.
Please leave the charging vehicle and
observe the guidelines specified by the
charging station during charging. Stand
away from the safety line due to the risk of
high voltage.
Precautions on Electric vehicle
High Voltage System
● Battery
The DC high voltage created by the vehicle
power battery is very dangerous. It may result
in electric shock, serious burn injuries or even
death. It is prohibited to dismantle the electric
vehicle power battery without permission.
2-10 BYD e6A Operation and Driving
BYD e6A AUTO Owner's Manual
● High-voltage circuits
All high-voltage wire harnesses in the vehicle
are colored bright orange. Never touch the
high-voltage wires and their connectors.
● High-voltage components, such as motor
controller and DC-DC.
Please do NOT disassemble or replace any
high-voltage components, such as motor
controller and DC-DC located in the front
motor cabin or the high-voltage power
distribution box in the trunk, without
permission.
● Service switch
In an emergency, power the vehicle off, pull
out the emergency service switch under the
console, and place the plug securely.
Never touch the socket by hand or conductive
objects
Notice: make sure that the vehicle is powered
off overall before pulling the emergency
service switch out. Otherwise, it may cause
negative effects to the vehicle, and even lead
to an accident.
● When charging
Make sure that the vehicle is powered off
overall before charging. Please stand behind
the yellow safety line of the charging station
when charging.
WARNING
Make sure that the vehicle is powered off
overall before charging, that is to say, the
power supply switch should be off. Please
keep away from the vehicle and stand
behind the yellow safety line of charging
station when charging.