BYD e6A Owner's Manual page 84

Configuration 2:
The methods of use for the front wiper
and washer are the same as that for
Configuration 1.
Rear Wiper and Washer
a. By turning the switch knob to the position
"ON", the rear wiper will be started.
b. By turning the switch knob to the position
"OFF", the rear wiper will be stopped.
c. If the switch knob is turned downward
from "ON" to the position
from "OFF" to the position
wiper and the rear washer will be started
at the same time.
1-66 Switch
BYD e6A AUTO Owner's Manual
Outer Power Rearview Mirror
Switch
1
Adjust the outer rear-view mirrors with this
switch.
1. Selection switch - it is used to select which
rear-view mirror shall be adjusted.
Press the switch to "L" (left) or "R" (right).
2. Control switch - it is used to adjust the
outer rearview mirror.
Press switch as per your demand.
3. Folding switch-it is used for folding outer
rearview mirrors.
, or upward
When the key is in the position "ACC" or "ON",
, the rear
the outer rearview mirrors can be adjusted.
If the rear-view mirror is frozen, do not
manipulate the controller or scrape the
surface of the rearview mirror. Use a
3
spraying deicer to remove the ice on the
surface of the rearview mirror.
2
Power windows
The windows can be operated by switches on
each door.
The key should be in the position "ON".
NOTE
1
2