BYD e6A Owner's Manual page 140

f. Remove wheel bolts and replace the tire.
Take off the flat tire and put it aside.
Roll the spare tire to the installation position,
align the bolt to the tire hole, and then raise
the tire until the top bolt fits into the screw
hole. Rotate the tire. Install all bolts into the
corresponding screw holes.
Before installation, please brush off all
corrosive materials on the installation surface
with a wire brush. During installation, the
metal area on the installation surfaces must
be in well contact with each other, or the
3-8 Emergency Treatment
BYD e6A AUTO Owner's Manual
wheel bolts may get loose, which may cause
the tire falling off in driving.
Reinstall Wheel Bolts
g. Reinstall all wheel bolts manually.
To reinstall bolts, please manually tighten
them with wedged end inward first. Push the
wheel backward and try to further tighten the
bolts manually.
Tips
Do not apply engine oil or lubricant on the
bolts, or they will get loose, which may
cause the wheel detached and lead to
serious accident. If there is engine oil or
lubricant on the bolts or nuts, clean them
immediately.
Lower Down Vehicle