BYD e6A Owner's Manual page 90

Instruction for use of the in-vehicle
CD
panel
"Power/Volume Switch" knob: the volume can
be adjusted by turning the knob; the
player can be turned on/off by pressing
the knob.
"SEEK+" button: in the CD mode, press the
button shortly to select the next program
and press the button long to forward
fast; in the radio mode, press the button
shortly to search for a strong certain
radio channel in the direction of higher
frequencies automatically.
"SEEK-" button: in the CD mode, press the
button shortly to select the last program
and press the button long to rewind fast;
in the radio mode, press the button
shortly to search a strong certain radio
channel in the direction of lower
frequencies automatically.
"SCAN" button: in the radio mode, press the
button shortly to scan the saved radio
channels quickly; press the button long
to search channels automatically, and
1-72 Automobile Multimedia System
BYD e6A AUTO Owner's Manual
after the search is finished, the
automatically-locked frequency bands
will be saved in the preset buttons 1-6.
"FM1" button: press the button to switch to
the "FM1" radio function in all modes.
"FM2" button: press the button to switch to
the "FM2" radio function in all modes.
"AM" button: press the button to switch to the
"AM" radio function in all modes.
"AUDIO" button: press the button to switch to
sound effect setting. The setting options
are treble, bass, fader and balance.
"DISC" button: press the button to switch to
the CD mode in all modes. "NO DISC"
will be displayed under the event of no
disc being inserted.
"AUX" button: press the button to switch to
the AUX mode in all modes and "NO
AUX" will be displayed if there is no data
connection cable. Insert one
audio cable into the output end of the
external audio equipment (e.g. MP3),
and insert the other end into the AUX
input hole. Turn on the CD player power,
press the button AUX, and ensure the
external audio equipment is set to ON.
Then music programs in the external
audio equipment can be played by the
on-vehicle CD player. Under other
playing modes, press the button AUX to
switch to the playing mode of external
audio equipment automatically. In this
event, if there is no external audio
equipment,
previous playing mode before the button
was pressed. When the CD player is on,
if the external audio equipment is
inserted, the system will switch to the
playing mode
equipment.
"TUNE+" button: under the radio mode, press
the button shortly to search the next
frequency (higher frequencies) manually;
by holding the button, the frequency will
get higher continuously and quickly;
end of the
when the button is released, it will stop in
the current position.
the player will return to the
of external audio