CARE AND MAINTENANCE
Storage
Store this Power Inverter in a cool, dry area and keep it away from direct sunlight, heat, excessive
humidity and dampness. Storage temperature should be between -4°F and 185°F (-20°C and 85°C)
with the humidity between 10% and 90%.
Cleaning
Do not clean or wipe the Power Inverter with solvents or chemical materials. If necessary, remove dirt
or stains using a soft cloth dampened with a mild detergent solution.
Disposal
The Power Inverter is designed to provide years of service. Because the Inverter and
cables contain lead, they should be recycled or safely disposed of at a local recycling
center. Examples of places that will accept items like this are: county or municipal
recycling drop-off centers or scrap metal dealers.
SPECIFICATIONS
1.
DC Input Voltage
2.
AC Output Voltage
3.
Current Output Rating
4.
No Load Current Draw
5.
AC Receptacles
6.
Maximum Continuous Power
7.
Peak Surge Output
8.
Effi ciency
9.
Max. Current Consumption
10.
Signal Format/Output
11.
Working Temperature
12.
Storage Temperature
13.
Storage Air Humidity
14.
DC Fuse Requirement for Solid Wired Installation
15.
Cable Requirement @ 6 ft (1.8 m)
16.
Cable Requirement @ 10 ft (3.0 m)*
* For cable requirements greater than 10 ft, consult a licensed electrician.
11-14.5V
120V ± 10%
12.5A
≤ ??A
Four 120V AC North American Standard
Receptacles
3000W
6000 Watts (0.1 Sec)
≥ 80%
≤ ??A at 3000W
Modifi ed Sine Wave 60Hz ± 2Hz
50°F to 80°F (10°C to 27°C)
-4°F to 185°F (-20°C to 85°C)
10%-90%
500-amp ANL
00 AWG
250 MCM AWG
9
Factory
to
supply
data -
Eng/
Span